Cart 0
Saman Water Based Varnish


Saman Water Based Varnish


Saman Water Based Varnish

The aluminum oxide nano technology is more than twice as durable as traditional water based finishes. This self-leveling and non yellowing formula dries fast in a crystal clear finish.


  • 32oz (Quart)
  • 128oz (Gallon)


Types of projects:

  • all interiors wood surfaces
  • furniture
  • doors
  • cabinets
  • commercial & residential


  • Brush
  • Velour Roller
  • HVLP Spray

Covering power: A 946 ml (1L) container covers approximatively 150 sq. ft.


Before you begin:

Make sure the product is at room temperature. Stir the varnish with a stick so that the matter at the bottom of the container peels off and blends perfectly with the mixture before starting.

Surface preparation:

Bare wood: Sand with a 120 or 150 grit sandpaper. Do not use steel wool. Vacuum the dust and wipe it off with a clean, dry cloth.
Varnished wood: The surface must be dry, clean and free of dust, mold, wax, grease and moisture. Wash the surface with SamaN’s TSPeco and lightly sand with a 150 grit sandpaper.
Stained wood: Ensure that the surface is completely dry before applying the product. This will prevent the pigments of the stain from rising up into the varnish and give an uneven finish.


  • Apply 2 to 3 coats of SamaN’s water-based varnish following the direction of the wood grain with a good quality brush, an 8 mm lint-free roller or an HVLP paint gun.
  • Sand between coats with a 180 grit sandpaper.
  • Vacuum sandblasting dust and wipe off with a clean, damp cloth to remove any residue.
  • Repeat this process between each coat of varnish to be applied.

Drying time:

  • Let it dry for 1 to 2 hours between coats.
  • Wait 24 hours before allowing light traffic.
  • Wait one week for heavier traffic or to lay your rug.

Cleaning tools:

Clean all tools and equipment with hot water and soft soap immediately after use.


Share this Product

More from this collection